Medium to large commercial establishments in unserviced areas will require a Permit to Construct for the septic/private water treatment system (eg. Motels, large restaurants, trailer parks, etc.). Daily sewage flow to be determined using the Guidelines for the Design, Construction and Operation of Water and Sewerage Systems issued by the Department of Municipal Affairs and Environment.
Requirements
1. Completed application form;
2. Certified engineer’s plans and report including:
- Daily sewage flow calculations;
- Certified percolation times for the disposal field area;
- Length of tile field required; and
- Site plan with details of location of buildings, property boundaries, location of septic tank, distribution box, tile field, sewer lines, location of test pits, site of well or water supply;
- Details of proposed water treatment system. Plans should include details on type and location of system and source of water.
3. Building details showing bedrooms, kitchen, shower / laundry facilities, etc. as appropriate;
4. For restaurants, large kitchens, etc. details for a grease trap must be provided;
5. Drawings must be fully dimensioned;
6. Plans must show configuration of disposal fields clearly indicating the number, spacing, and length of lines;
7. Plans must show elevations for the septic tank, including inverts for inlet and outlet pipes, and elevation of the field relative to the building floor elevation; and
8. If a prefabricated septic tank is proposed, clearly dimensioned shop drawings must be submitted. Prefabricated tanks must meet CSA Standard CAN/CSA-B66-00. If a locally made septic tank is to be used, it must be certified by the engineer.
Legislation
Statutes | Regulations |
---|---|
Environmental Protection Act | Environmental Control Water and Sewage Regulations, 2003 |
Water Resources Act | Well Drilling Regulations, 2003 |
Applications and Publications
- Guidelines for the Design, Construction and Operation of Water and Sewerage Systems
- Application form (192 KB)
Applications can be submitted to EngineeringInspection@gov.nl.ca or the nearest office location.
Fee
- Fees Policy (61 KB)
Contact
- Tel: 709-729-2749
- E-mail: EngineeringInspection@gov.nl.ca
Refer to the Government Service Centre Division’s locations page for additional contact information.
Adobe® Acrobat® Reader software can be used for viewing PDF documents. Download Acrobat® Reader for free.